If you got stuck while playing Rooms & Exits Level 11 Chapter 2 – DIY Shop, don’t worry – it happens! And today I am here to help you beat this level by sharing the complete text walkthrough below.
So if none of the in-game hints help anymore, use this text walkthrough without worries. I hope you appreciate text walkthroughs as much as I do – they don’t give you spoilers for the full game, just the part you’re stuck with!
Or, if you want, you can use my Rooms & Exits DIY Shop walkthrough to complete the entire level. Let’s jump right in!
1. Get the Gloves from the beams on the boxes to the left, and use them on the electric wires behind the panel. Then, tap the light switch on the wall to the right.
2. Get the Hanger from under the workbench and then the Box cutter from the corner of the desk.
3. Use the box cutter on the boxes to the right and get the Lighter.
4. From the cabinet under the desk, get the UV lamp. Tap the item on the desk and notice the code on the piece of paper. Also, take the Blowtorch part from behind.
5. Use the box cutter on the drapes and zoom into the blue item there. Open the drawer using the code from the piece of paper (press the buttons in this order: 51432). Get the hammer.
6. Zoom into the blue board above the desk and use the UV lamp to reveal the code: 4-2-1-3-0 (they are all divided into two by the line and mirrored, except for the zero).
7. Use the hammer in your inventory to break the wall above the desk and open the safe using the code above. Get the new Blowtorch part. Combine the two parts in your inventory, then combine it with the lighter to get the Lit Blowtorch.
8. Use it to cut through the lid on the floor near the workbench. In your inventory, dismantle the Hanger to get a Hook, then use it to get the key.
9. Tap the blue chest of drawers and use the key to open the bottom drawer. Get the blueprint and key.
10. Use the key to open the door to the left and get inside the new room. Get the Ladder by the door, and the Batten by the paint boxes.
11. In your inventory, combine the Batten and the Lit blowtorch to get Cut Batten. Combine those with the Ladder.
12. Use the fixed ladder to reach the top shelf and get another Blueprint.
13. Go to the other door and zoom into the workbench. In your inventory, dismantle both blueprints and place them on the board. The second blueprint must be rotated until the red area perfectly fits over some of the letters (GDC).
14. Go to the other room and open the toolbox using the code you just discovered. Get the Crowbar.
15. Go to the other room and zoom into the planks on the floor. Use the crowbar on the loose one and get the tracing paper.
16. Go to the other room and open the control panel using the code on the paper (954). Place the valves in the correct position (left, right, bottom) – you get the correct order from the blueprints we did earlier (look at the top of the paper).
17. Go back to the other room and use the door to exit.
This is it! You have completed the level! You can now challenge yourself by playin the next one or any of the previous levels, listed below:
- Rooms & Exits Chapter 2 Level 6: Candy Shop Walkthrough
- Rooms & Exits Chapter 2 Level 7: Food Court Walkthrough
- Rooms & Exits Chapter 2 Level 8: Pet Shop Walkthrough
- Rooms & Exits Chapter 2 Level 9: Indoor Playground Walkthrough
- Rooms & Exits Chapter 2 Level 10: Restaurant Walkthrough
Don’t forget – I also have a full Rooms & Exits walkthrough index here, ready to help if you get stuck at any other level.
If you still have questions about the DIY Shop Level, let me know by posting a comment below, and I will help ASAP.
- Best Ways to Spend Vitality in Tower of Fantasy - March 13, 2026
- HumanitZ Radio Receiver: Location and How to Use - February 27, 2026
- Rooms & Exits Parking Walkthrough (Level 26, Chapter 2 – No Honor Among Thieves) - February 27, 2026